Tech Source Raptor OpenWindows for Solaris - Manual (Page 31)

Chapter 4 – Software Installation for T-Class Cards
4-5
Raptor cards support the following bit-depths:
8 8-bit PsuedoColor
8+24 Simultaneous 8-bit PsuedoColor and 24-bit
True Color
24 24-bit True Color
8+8 Two 8-bit PseudoColor visuals
mox16 MOX, 8-bit Normal, 13-bit Group, 5-bit
Absolute
mox24 MOX, 8-bit Normal, 21-bit Group, 13-bit
Absolute
mox32 MOX, 8-bit Normal, 24-bit Group, 21-bit
Absolute
The next section describes how to use trzconfig to configure
the Raptor card.
4.5.1 Interactive Configuration
The trzconfig utility has an interactive menu-style interface
(See Figure 4.1). To use this program to configure your Raptor
card, type:
prompt# trzconfig
NOTE: If X Windows is running on the Raptor card(s) to be
configured, please exit out of it before running trzconfig.
Failure to do so could result in a corrupted screen for the
remainder of the X Window session.
The Raptor device(s) will be listed in the left column of the
configuration screen displayed by trzconfig. (See Figure
4.1).