Tech Source Raptor OpenWindows for Solaris - Manual (Page 27)

4-1
Chapter 4
SOFTWARE INSTALLATION FOR
T-CLASS CARDS
4.1 Overview
This Chapter describes how to install and configure T-Class
Raptor cards. Installation of I-Class Raptor cards is covered in
Chapter 3. The following is a list of T-Class cards:
•
Raptor 2100T
•
Raptor 1100T
•
Raptor 2500T
•
Raptor 2500T-DL
NOTE: This software must be installed on your system prior to
running OpenWindows on these cards.
The software for the T-Class cards is provided on CD-ROM or by
FTP and is composed of the following packages:
•
TSItrz.u Device drivers for the Raptor T-Class cards.
•
TSItrzw OpenWindows DDX for the Raptor T-Class
cards.
4.2 Requirements
The following are prerequisites for installing the Raptor
OpenWindows for Solaris Software:
•
The system is running Solaris 2.5.1 or higher.
•
OpenWindows Version 3.5 or higher has already been
installed on the system. This is typically bundled with the
OS.