Tecfluid FLOMID-MX - Manual (Page 7)

7
3. Push button
- To change the display between flow rate, total volume or partial volume.
- Together with to enter in the set-up mode
Set-up mode
- To rotate between the set-up mode options.
- To increment the value of a digit.
4.
Push button
- To stop a batching process.
- Together with the push button, to reset the total volume counter.
Set-up mode
- To exit a set-up mode option without storing modified data (Escape).
5.
LCD Display (16 character x 2 lines).
6.
Jumper to inhibit push buttons.
Opening the front cover of the instrument, a jumper situated on the left hand side printed circuit
can be accessed. Removing this jumper will inhibit all of the push buttons, that is to say that the
instrument will not respond to any push button.
3.2 Power up
When the power supply is switched on the display will show the power up screen and after the
default working screen.
T e c f l u i d F L O - M X
V e r s i o n X . X