Tecfluid FLOMID-MX - Manual (Page 16)

16
To program the languages the use of the push buttons is slightly different from the normal
use.
1.
Push button
- To move to the next character.
- Together with the
push button to store the message.
2.
Push button
- To decrement the value of the digit (or character).
- Together with the push button to store the message.
3.
Push button
- To increment the value of the digit.
4.
Push button
- To change from lower case letters to capital letters and vice-versa.
It is not necessary to program all the screen messages in one sitting. The program will let us
add letters in places where the position is empty (shown as “_”). It is recommended to program the
language name first of all.
Once the name of a new language has been stored then it will automatically appear in the
sequence for selecting the preferred language as a defined language.
To add messages of a defined language (if we have only programmed some of the messages of a
new language) then we scroll through the options of preferred language until the wanted language is
shown:
L a n g u a g e
D e u t s c h
and then press push buttons
and .
In this case we have entered in the option for programming new languages but the screens that
have been programmed beforehand will not be empty. For example:
E n g l i s h
_ _ _ _ D e u t s c h _ _ _ _ _
We must remember that we can only change the empty positions (“_” symbol)
4.7 Test
T e s t
It allows us to check the outputs of the device.
By pressing the key
we enter in the test mode. The following screen appears.
O u t P u l m A