Teac G-01 - Manual (Page 20)

20
Settings are retained even after the power cord has been disconnected.
If you have made changes using the settings menu, and want to
restart with the original settings, restore the unit to the default factory
settings as follows.
1 Turn the unit off.
If the unit is on, press the POWER button to turn it off and wait for
more than 30 seconds.
2 Press the POWER button while holding down
the MASTER/MENU button.
0 Release the MASTER/MENU button when the unit turns on
and the display lights.
Restoring factory default settings Maintenance
If the surface of the unit gets dirty, wipe with a dry soft cloth. If it
becomes very dirty, dampen a soft cloth slightly with a diluted neu-
tral cleanser and remove any excess fluid from the cloth thoroughly
before wiping the unit.
Q For safety, disconnect the power cord from the socket
before cleaning.
0 Never spray liquid directly on this unit.
0 Do not use thinner or alcohol as they could damage the surface of
the unit.
0 Avoid allowing rubber or plastic materials to touch this product for
long periods of time, because they could damage the cabinet.