Using a footswitch, Connecting a footswitch, Setting the function – Teac CD-GT2 User Manual

Page 35: Important safety instructions, Other functions

IMPORTANT SAFETY INSTRUCTIONS

TASCAM CD-GT2

Other functions

LEVEL

Adjust the output sound level between 0 and 100 with the

VALUE

(–, +) keys.

CALIB
Set the standard frequency of middle A between 435 Hz and
445 Hz. This setting affects all tuner modes.

Using a footswitch

You can use a footswitch to control certain operations. A
footswitch can be set to control FLASH BACK, fast reverse or
fast forward, as well as to change the effect bank or turn the
effects ON and OFF.

Connecting a footswitch

Connect a TASCAM RC–30P or other momentary footswitch
(non-latching) to the FOOT SW jack on the front of the unit.
After connection, press the

MISC.

key to open the

SETUP &

MISC.

screen and make settings as necessary.

Setting the function

Use the

CURSOR

(

) keys to select

FOOT FUNC

, and the

VALUE

(+, –)

keys to choose one of the following functions.

FLASH

functions like the

FLASH BACK

key

REW

functions the same as the

∆

key

functions the same as the

≤

key

BANK

changes the effect bank

EFFECT

turns the effects ON and OFF

Setting the polarity
When using a footswitch other than a TASCAM RC-30P, the
polarity might need to be changed. Use the

CURSOR

(

)

keys to select the

FOOT TYPE

item and the

VALUE (+, –)

keys to select

NORMAL

INVERT

according to the type of

footswitch used.