Important safety instructions, Using guitars and mics – Teac CD-GT2 User Manual

Page 31

IMPORTANT SAFETY INSTRUCTIONS

TASCAM CD-GT2

Using guitars and mics

select settings in the pop-up, and use the

VALUE

(+, –)

keys to

adjust these settings.

BANK
Select bank

–

BYPASS

Using the

PRESET

item explained below, you can set a

preset effect for each bank. By making presets of settings that
you use frequently in each bank, you can quickly recall the
settings you desire just by switching through the banks. You
can save separate settings for each

BANK

for both

GUITAR

and

MIC

input settings.

Select

BYPASS

if you do not want to use effects.

PRESET
Choose the effect preset that you want. Each preset has a
different combination of up to three effect modules.
Either guitar or mic presets are available depending on the

GUITAR/MIC

input setting.

See the “Effect presets list” on page 39 for details about the
effect modules in each preset.

LVL knob
Adjusts the output level of the effect. Use the

CURSOR

(

) keys to select the

LVL

knob and open the pop-up with the

level value highlighted. Use the

VALUE

(+, –)

keys to adjust the

level setting between 0–100.

Effect modules
Use the

CURSOR

(

) keys to select the module icons and

open a pop-up with parameter settings as shown in the figure
below. The parameters depend on the type of module. For
details about the parameters for each module type, see the
“Effect module parameter list” on page 42.

NOTE

When the

LVL

knob or an effect module parameter is

selected, use the

CURSOR

(

) keys to move between

modules and the

CURSOR

(

) keys to move between

settings.