Teac US-16X08 Reference Manual - Manual (Page 22)

22
TASCAM US-16x08
7 – Mic Preamp Mode
Using the unit as a standalone mic
preamp
This unit will operate in mic preamp mode when it is not
connected to a computer by USB.
You can use this unit's mic preamps even when it is not
connected to a computer.
8 Input and output channels in mic preamp mode
In mic preamp mode, the routing of input to output channels is
fixed as follows.
Input Output
IN1 LINE OUT1
IN2 LINE OUT2
IN3 LINE OUT3
IN4 LINE OUT4
IN5 LINE OUT5
IN6 LINE OUT6
IN7 LINE OUT7
IN8 LINE OUT8
You can adjust the input level of each channel using its gain
knob.
NOTE
When shipped from the factory, the LINE OUT 1-2 knob is
set to its minimum value, so no sound will be output from
the LINE OUT 1-2 jacks. When using the unit in mic preamp
mode, set the LINE OUT 1-2 knob to its maximum value.