Teac MMR-8 v1.25 - Manual (Page 8)

Tascam MMR/MMP Owner’s Manual • Version 1.25 Update Information 8
Set up a Project template on each drive
Create an “A” project on the lowest numbered SCSI drive
Boot the system, create the desired project name in menu 800 and press STO
Arm 4 tracks and record at least a second or so of audio
The project is created on the disk
Create a “B” project on the lowest numbered SCSI drive
Name the project in menu 800, press STO
Arm the last 4 track (5-8) and record at least a second or so of audio
The project is created on the disk
Copy (backup) the “B” project to the second drive
Press LOAD TRACK, find “B”
Press SHIFT + SLIP (Backup) to enter backup state
Choose Backup to (target drive #) for second drive
Press STO to start the backup
Setting up to Record
Load Project “A” from the first drive
Press LOAD TRACK, find “A”
Press LOAD TRACK again to select lowest numbered SCSI Device and press STO
Project “A” from lowest numbered SCSI device is loaded into tracks 1-4
Load tracks from Project “B”
Press LOAD TRACK, find “B”
Press LOAD TRACK again to view tracks
Load Tracks 5-8 from Project B into Tracks 5-8 of “A” which is already loaded
Now when recording, the audio for tracks 1-4 will be recorded onto Project “A” on the lowest
numbered drive, and tracks 5-8 will be recorded into project “B” on the second SCSI drive
simultaneously.