Teac HS-P82 Addendum V1.20 - Manual (Page 2)

HS-P82
2
TASCAM HS-P82
Line Input Trim function
A function has been added that allows you to use the input trim
knobs to adjust the input levels of line inputs.
A Line Input Trim item that has been added to the PREFERENCE page
of the SYSTEM SETUP screen. If you set it to “Enable”, you can use
the input trim knobs to adjust the input levels of line level inputs.
Options include MUTE and a range from −20.0 dB to +20.0 dB.
NOTE
• In the same way as when adjusting the input level of a MIC input,
turning an input trim knob will cause the gain value to be shown
briefly in the track name display area below the meter on the
Home Screen.
• If the INPUT SOURCE setting is set to a digital input, the input
level cannot be adjusted.
Take Rename function
A function has been added that allows you to change the names of
takes.
Follow the procedures below to do so.
1. On a take selection screen, select that take that you want to
rename.
2. Touch the MENU button on the take selection screen to
open a pull-up menu (An EDIT NAME button, which is shown
framed in red below, has been added to this pull-up menu).
3. Touch the EDIT NAME button in the pull-up menu to open
the TAKE NAME screen. (On this TAKE NAME screen, you can
change the input take name.)
NOTE
When multiple takes are selected, you cannot use the EDIT NAME
button in the pull-up menu.
4. Edit the take name.
5. Touch the Enter button on the TAKE NAME screen or press
the DATA dial to confirm the changed take name and return
to the take selection screen.
TC SYNC REC function
A function has been added that allows you to make this unit
automatically start and pause recording in response to the state of
an external timecode signal.
• A TC SYNC REC button has been added to the TC GEN MODE item
on the SETUP page of the TC/SYNC screen.
When in TC SYNC REC mode, recording starts when the unit
synchronizes to external timecode, and recording pauses when
external timecode synchronization is lost.
• When TC SYNC REC mode is set, the TC indicator on the Home
Screen appears as follows.
Indicator when in TC
SYNC REC mode Indicator when not in TC
SYNC REC mode
TC locked Lit red Lit green
TC unlocked Blinking red Unlit
NOTE
Use the same frame type for this unit’s project and the input
timecode.
New pop-up message added in HS-P82 V1.20
Message Details and
responses Remarks
Writing Mark Info... Mark
information is
being written
If a Mark is added during
playback of a file of 1GB or
larger in size, this popup
appears when playback is
stopped.