Teac HS-P82 Addendum V1.20 User Manual
Teac Audio
TASCAM HS-P82
1
HS-P82
D01166720B
Contents
New functions in firmware V1.10 ...............................................3
Mirror recording function added .........................................................3
Recording times when set to mirror recording ..............................5
Slate on status can now be retained ...................................................5
Addition of take end time code display .............................................5
New pop-up messages added in HS-P82 V1.10 .....................6
New functions added in firmware V1.04 .................................7
Mid-side (MS) microphone connection mode added ..................7
Trim group function addition ................................................................8
Zero trim function added .......................................................................8
Firmware V1.02 new functions ....................................................9
indications ....................................................................................................9
Addition of a date input button ........................................................ 10
Next Take Name editing function added ....................................... 10
Mono file recording folder selection ...............................................11
Limitations to recording operations ................................................ 12
Change of the default reference level ............................................. 12
New functions in firmware V1.20
The following new functions have been added in firmware V1.20
• A function has been added that allows you to use the input
trim knobs to adjust the input levels of line inputs. (A detailed
explanation of the Line Input Trim function follows.)
• A function has been added that allows you to change the names
of takes. (A detailed explanation of the Take Rename function
follows.)
• A function has been added that allows you to make this unit
automatically start and pause recording in response to the state
of an external timecode signal. (A detailed explanation of the TC
SYNC REC function follows.)
• A function has been added that allows you to press the DATA
dial to show the MIC/LINE trim values briefly beneath the meters
when the Home Screen,
REC TRACKS
page of the
REC SETUP
screen,
CHANNEL SETUP
screen or
METER SETUP
screen is
open.
•
EDIT NEXT TAKE PREFIX
and
EDIT NEXT TAKE NAME
options have been added to the
Function Key Assign
item
on the
REMOTE SETUP
screen.
• A function has been added when a character or number input
screen is open that allows you to clear all the characters/numbers
by pressing the BACKSPACE key while pressing and holding the
SHIFT key on an external keyboard. (Previously, on a number
input screen, pressing the Esc key cleared input numbers, but this
has been changed.)
• A function has been added that allows you to press the 2/
x
key
on an external keyboard to move the cursor to the beginning/end
of a line of characters when a character input screen is open.
• A function has been added that allows you to use the Esc key on
an external keyboard in the same way as the EXIT/CANCEL key
on the front panel of the unit.
• A function has been added that allows you to use the F1-F4 keys
on an external keyboard in the same ways as the F1-F4 keys on an
RC-F82.
• A function has been added that allows you to use the F5-F11 keys
on an external keyboard in the same ways as keys on the unit.
Assignments of F1-F11 keys on an external keyboard
Key
Function
F1
Same as the RC-F82 F1 key
(Set by the F1 Function Key Assign setting on the RC-
F82 page of the REMOTE SETUP screen)
F2
Same as the RC-F82 F2 key
(Set by the F2 Function Key Assign setting on the RC-
F82 page of the REMOTE SETUP screen)
F3
Same as the RC-F82 F3 key
(Set by the F3 Function Key Assign setting on the RC-
F82 page of the REMOTE SETUP screen)
F4
Same as the RC-F82 F4 key
(Set by the F4 Function Key Assign setting on the RC-
F82 page of the REMOTE SETUP screen)
F5
SKIP REW
F5 (press
and hold)
REW
F6
SKIP FF
F6 (press
and hold)
FF
F7
STOP
F8
PLAY
F9
PAUSE
F10
REC
F11
MARK
SHIFT+F5 MARK SKIP REW
SHIFT+F6 MARK SKIP FF
SHIFT+F7 RETAKE
SHIFT+F8 CALL