TE Technology TC-36-25-RS232 - Manual (Page 32)

7.0 Custom Software
The controller does not specifically have to be used with the software that is provided. You can create your own
control programs using commercial software such as LabVIEW from National Instruments. This might be useful if
you wanted to control a specific temperature profile over a particular amount of time. This is accomplished by
communicating through the RS-232 port of the computer using the command set for the controller. The command
set is given in Appendix B “Serial Communications.”
TE Technology has developed some LabVIEW programs for internal use. We would be happy to share them for use
as a starting point for your custom software application. Please email the company if you are interested in this
option.
32