Super Systems Paperless VR - Manual (Page 61)

Super Systems Inc. Page 60 Video Recorder Manual Version 2 Rev. B
Clicking on the down arrow will give the user the ability to download data from all of the Video Recorder
screen definitions, or only the selected screen. Clicking on the button will begin the download progress.
If there are multiple screens,
then each screen will be
displayed along with the
progress of each download.
Clicking on the “Show Details”
link will expand the screen
and show any download
details. The link will then say
“Hide Details”, which will
shrink the screen and not
provide any details. If there
are any errors with
downloading, then there will
be an “X” next to the screen
with the issue. The error will
be listed in the details section. If the download is successful, then the download screen will close when
the download is finished.
Flash Card Synchronization
When synchronizing from a flash card, the flash card needs to be retrieved from the touch screen on the
video recorder. The screen should be turned off before pulling the flashcard. When the screen is turned
off, data is still being stored. Data will be stored on the data logging device and when the flash card is
returned to the screen
and the screen is turned
on, the data will be
transferred to the
flashcard for the period
of time when the screen
was turned off
automatically. The data
logging device storage
depends on the number
of points being logged
but is capable of storing
over 3 days of data on a
10 channel video
recorder.
The storage location of
the flash card should be
selected using the
period button on
the Data Transfer
screen’s Transfer Data tab.
The Maintenance tab is used to delete logged data either from the video screen directly or on the flash
card. Logged data and notes can be removed to create additional free space on the storage card. All data