Sundance SMT1026 - Manual (Page 5)

•
Accelerate your development time by providing ready-to-use library of functions.
•
Configure the FPGA from the Host.
•
Transfer data from the FPGA-only module to the Host.
•
Control the data acquisition on the daughter modules from the Host.
•
Give you a basic framework for more complex custom systems.
•
Provide you with C++ type interfaces to the FPGA-only modules.
1.2 Supported Hardware
The SMT1026 currently supports the following carrier boards:
Carrier board Description Functionality
SMT100 SLB carrier, Virtex 5, 512Mbytes DDR2,
USB2, RS232, MicroSD/Transflash, 4-
lane and 1-lane PCIe interface, 32-bit
33MHz PCI, cable PCIe connector Full support
SMT101 SLB carrier, Virtex 5, 512Mbytes DDR2,
USB2, RS232, MicroSD/Transflash, 4-
lane and 1-lane PCIe interface, 8 channel
12-bit ADC, 32-bit 33 MHz PCI Full support
SMT105 SLB carrier, Virtex 5, 512Mbytes DDR2,
USB2, RS232, MicroSD/Transflash, 4-
lane and 1-lane PCIe interface, 3 banks
of QDRII memory 72 Mbit, 2x Fibre
modules Full support
The SMT1026 currently supports the following FPGA-only module:
Carrier board Description
SMT350 Dual ADC/DAC module at 500MSPS
SMT351 1GB memory module
SMT370 Dual channel ADC/DAC
SMT381 Dual 14-bit DAC module at 1GSPS
SMT384 Quad 14-bit ADC module at 125MSPS
SMT390 Dual 12-bit ADC module at 210MSPs
SMT391 Dual 8-bit ADC module at 1GSPS
SMT941 4 channel 14-bit ADC at 250 MHz
2 Getting started
This section will help you to get started:
•
Abbreviations
•
Prerequisites
•
Software Installation