Sundance SMT1026 - Manual (Page 29)

The SMT384 structures
struct CLKMODE384
bool bExtRef
true = external reference;
false = on-board 10 MHz reference.
The default value is false.
bool bExtClk
true = external clock;
false = on-board VCXO.
The default value is false.
bool bABTrigInvert
true = trigger polarity channel A and B;
false = Non-inverting.
The default value is false.
bool bABTrigExt
true = trigger selection channel A and B;
false = internal trigger.
The default value is false.
bool bCDTrigInvert
true = trigger polarity channel C and D;
false = Non-inverting.
The default value is false.
bool bCDTrigExt
true = trigger selection channel C and D;
false = internal trigger.
The default value is false.
CHSEL ABChSel
Channel A and B selection.
The default value is channelab.
CHSEL CDChSel
Channel C and D selection.
The default value is channelab.
bool bAB2sComplement
True = ADC A and B output 2’s complement samples
False = ADC A and B output binary samples.
The default value is false.
bool bCD2sComplement
True = ADC C and D output 2’s complement samples
False = ADC C and D output binary samples.
The default value is false.
3.3.6 SMT391 interface
The SMT391 interface can be used with a SMT391 plugged in a Sundance carrier board.
This section describes:
the SMT391 functions
• Reset
•
ConfigureADCReg