Sundance SMT1026 - Manual (Page 40)

setting the "Bytes to avoid" field, the comport buffer gets empty before starting the
acquisition.
Host link: Select the link used between the host and the carrier board. Most of the time it
will be the host comport but sometime it's possible to use the host RSL.
Acquire data: Press this button to start an data acquisition.
4.1.2 SMT351
This section explains how to use the "Configure FPGA-only module" user interface.
For more information on how to set the parameters please look at the SMT351 user
manual .
1 - FPGA Configuration:
Bitstream: Select the FPGA bitstream. (This field is not used when the "Quick
Configuration" box is checked.)
Quick Configuration: Check this check box if the FPGA has already been configured with
the right bitstream. When this check box is checked, only a start key is sent to the FPGA
to reconfigure it.
Configure FPGA: Press this button to configure the FPGA of the SMT391.