Sundance SMT1026 - Manual (Page 21)

enum DATAFORMAT {
binary = 0,
complement2 = 1
};
Selects the format of the output samples.
enum SIGGEN {
sine = 0,
triangle = 1,
square = 2,
ramp_pos = 3,
ramp_neg = 4
};
Selects the shape of the signal to generate.
3.3.2 SMT350 interface
The SMT350 interface can be used with a SMT350 plugged in a Sundance carrier board.
This section describes:
the SMT350 functions
•
ResetDevices
•
ConfigureADCReg
•
ConfigureADCClock
•
Acquire
the SMT350 structures
•
CLKMODE350
•
SETDAC
• SETCLK
the SMT350 enumerated types
•
SMT350TYPE
•
SAMPLING_RATIO
The SMT350 functions
All the following functions can throw an SMTExc exception.
ResetDevices
Prototype: void ResetDevices(SMT350TYPE smt350type=cdcm7005);
Parameters: smt350type
Select the SMT350 type: CDCM7005 or AD9510. (See enum
SMT350TYPE ).