Sundance SMT1026 - Manual (Page 4)

1 Introduction
This section gives a brief description of the SMT1026 package.
The SMT1026 is a SDK for Windows.
The SMT1026 is an efficient, ready to use, host side interface to Sundance FPGA-only
module. It allows you to control the FPGA-only modules from the host as well as to
exchange data between the host and the module on the first site of the Sundance carrier
board.
The figure above shows the SMT1026 forming the link between your application and the
Sundance hardware in your system. The SMT1026 hides the details of the device driver,
allowing you to concentrate on the development process.
1.1 SMT1026 main features
This section lists the main characteristics of the SMT1026 package.
The SMT1026 SDK: