Studio Technologies 50 2005 - Manual (Page 35)

Model 50/51 User Guide Issue 7, August 2005
Studio Technologies, Inc. Page 35
Dimensions (Overall):
19.0 inches wide (48.3 cm)
1.72 inches high (4.4 cm)
8.75 inches deep (22.2 cm)
Mounting: one space in a standard 19-inch-type
rack
Weight: 8.9 pounds (4.1 kg)
Model 51 Control Console
Power Requirements: 15 Vdc filtered and regu-
lated, 90 mA maximum, provided by Model 50
Central Controller
Connectors:
To Model 50 Central Controller: 5-pin DIN-type,
female
Remote Control: ¼
-inch, 3-conductor phone jack
Internal Microphone:
Type: electret condenser
Frequency Response: 3 dB roll off at 105 Hz
Remote Control Contacts:
Connect normally open contacts to allow opera-
tion of remote talk to studio, remote control room
source select, and remote talk to headphones
functions
Dimensions (Overall):
7.4 inches wide (18.8 cm)
2.6 inches high (6.6 cm)
7.3 inches deep (18.5 cm)
Mounting: desktop; provision for stand mounting
provided
Weight: 2.5 pounds (1.1 kg)
Model 35 Talent Amplifier
Power Requirements: +20-32 Vdc (modulated
with left channel audio), provided by Model 50
Central Controller
Power Present LED: red, indicates presence of
operating power
Connectors:
Input (from Model 50): 3-pin XLR-type, female
Loop Thru: 3-pin XLR-type, male, connected in
parallel with input connector
Headphone Outputs: 2, ¼
-inch, 3-conductor
(stereo) phone jacks
Headphone Output: 1, feeds two headphone
jacks
Load: intended for connection to one or two pairs
of headphones with total impedance of 75 ohms
or greater
Output Level: user adjustable
Maximum Output Voltage: 16 V peak-to-peak into
150 ohms @ 1% THD+Noise, 400 Hz
Distortion (THD+N): 0.03%
Frequency Response: 20 Hz-20 kHz ±0.5 dB
Dimensions (Overall):
4.2 inches wide (10.7 cm)
2.0 inches high (5.1 cm)
5.3 inches deep (13.5 cm)
Mounting: desktop; provision for stand mounting
available as option
Weight:
0.8 pounds (0.4 kg)
Model 70 Interface
Power Requirements: +20-32 Vdc (modulated
with left channel audio), provided by Model 50
Central Controller
Power Present LED: red, indicates presence of
operating power
Connectors:
Input (from Model 50): 3-pin XLR-type, female
Loop Thru: 3-pin XLR-type, male, connected in
parallel with input connector
Left and Right Line Outputs: 3-pin XLR-type, male