Studio Technologies 50 2005 - Manual (Page 18)

Issue 7, August 2005 Model 50/51 User Guide
Page 18 Studio Technologies, Inc.
The Model 70 provides independent
left and right balanced outputs. Pin 1 is
shield, pin 2 is signal positive (+ or hot),
and pin 3 is signal negative (– or cold).
The electronically balanced outputs have
a nominal signal level of +4 dBu and are
capable of driving loads of 600 ohms or
greater.
The Model 70 can be used by itself, or
in conjunction with up to four Model 35
Talent Amplifiers. The loop through con-
nector on the Model 70 can be used to
connect to a Model 35 Talent Amplifier.
Configuration
Many StudioComm functions can be con-
figured to meet the exact needs of your
installation. Here’s an overview of what
you can configure:
• –10 dBV or +4 dBu level for each input
• Stereo or mono for each input
• –10 dBV or +4 dBu level for the dub
output
• Dim level
• Auto dim off function
Model 70 Front Panel
Model 70 Back Panel