Space Ray LTS Series Two Stage - Manual (Page 30)

Form #43155040
May 2013
-29-
The purpose of this type mounting is to allow the heater to be mounted in the plane of the roof (particularly in
modern “Butler” type buildings frequently used today). This will typically put the heater out of the way while still
providing the warmth and comfort. The heater can be inclined upwards from the control box to the draft inducer
at a distance of 2 inches up for every linear foot of the heater length. The total rise for each draft inducer is
tabulated in the table below:
TO TO TO TOTAL DRAFT INDUCER HEIGHT ABOVE HORIZONTAL FOR 2”/12” PITCH INSTALLATIONS TAL DRAFT INDUCER HEIGHT ABOVE HORIZONTAL FOR 2”/12” PITCH INSTALLATIONS TAL DRAFT INDUCER HEIGHT ABOVE HORIZONTAL FOR 2”/12” PITCH INSTALLATIONS TAL DRAFT INDUCER HEIGHT ABOVE HORIZONTAL FOR 2”/12” PITCH INSTALLATIONS
MODEL MODEL MODEL MODEL
Tube Length Tube Length Tube Length Tube Length
15 Ft. 15 Ft. 15 Ft. 15 Ft. 20 Ft. 20 Ft. 20 Ft. 20 Ft. 25 Ft. 25 Ft. 25 Ft. 25 Ft. 30 Ft. 30 Ft. 30 Ft. 30 Ft. 35 Ft. 35 Ft. 35 Ft. 35 Ft. 40 Ft. 40 Ft. 40 Ft. 40 Ft. 45 Ft. 45 Ft. 45 Ft. 45 Ft. 50 Ft. 50 Ft. 50 Ft. 50 Ft.
LTS 40-75 30” 40” 50” 60”
LTS 80-120 60” 70”
LTS 125-130 60” 70” 80” 90” 100”
LTS 140-175 80” 90” 100”
MODEL MODEL MODEL MODEL
Tube Length Tube Length Tube Length Tube Length
50 Ft. 50 Ft. 50 Ft. 50 Ft. 55 Ft. 55 Ft. 55 Ft. 55 Ft. 60 Ft. 60 Ft. 60 Ft. 60 Ft. 65 Ft. 65 Ft. 65 Ft. 65 Ft. 70 Ft. 70 Ft. 70 Ft. 70 Ft. 75 Ft. 75 Ft. 75 Ft. 75 Ft. 80 Ft. 80 Ft. 80 Ft. 80 Ft.
LTS 180-250 100” 110” 120” 130” 140” 150” 160”
The heater is subject to all other requirements presented in these Installations Instructions, particularly the
Clearances to Combustibles. If you plan to use this type of installation, order the Space Ray Inclined Mounting
Space Ray Inclined Mounting Space Ray Inclined Mounting Space Ray Inclined Mounting
Kit, Part #43238000 Kit, Part #43238000 Kit, Part #43238000 Kit, Part #43238000.