Space Ray LTS Series Two Stage - Manual (Page 25)

Form #43155040
-24- May 2013
5. For LT
For LT For LT For LTS225 S225 S225 S225----250 Mo 250 Mo 250 Mo 250 Models dels dels dels, join the first two body sections as illustrated below.
a) Join the tube flanges of the body sections together with the gasket in between. Loosely attach the
heater body sections together with the ¼-20 screws and locknuts provided. DO NOT DO NOT DO NOT DO NOT fully tighten the
screws and locknuts yet!
b) Tighten the screws and locknuts using the sequence shown. The screws and locknuts should be
tightened a little bit at a time (the same way you would secure the lug nuts to a car wheel).
Tube Flange
(with 12 radial holes)
Tube Flange
(with 6 holes)
Gasket
Tube Flange
(tightening sequence)
10FT Starting
Body Section
10FT Secondary
Body Section
1/4-20 Screw & Locknut
(QTY-6 per flange)
1
3 5
4
2
6