Denon AVR-5800 User Manual

Page 8

Connecting a video component equipped with S-Video jacks

• When making connections, also refer to the operating instructions of the other components.
• A note on the S input jacks

The input selectors for the S inputs and pin jack inputs work in conjunction with each other.

• Precaution when using S-jacks

This unit’s S-jacks (input and output) and video pin jacks (input and output) have independent circuit structures, so that video signals input from
the S-jacks are only output from the S-jack outputs and video signals input from the pin jacks are only output from the pin jack outputs.
When connecting this unit with equipment that is equipped with S-jacks, keep the above point in mind and make connections according to the
equipment’s instruction manuals.

LD player, CDV player, etc.

Monitor TV

Video deck 2

Video deck 1

TV or satellite broadcast tuner

Connecting a video disc player (VDP)

Connecting a monitor TV

Connecting the video decks

Connecting a TV/DBS tuner

VDP
• Connect the video disc player’s S-Video output jack to the

S-VIDEO VDP IN jack using an S-Video connection cord.

• A DVD player can be connected to the DVD jacks in the same

way.

• It is also possible to connect a video disc player, DVD player,

video camcorder, game machine, etc., to the V.AUX jacks.

MONITOR OUT
• Connect the TV’s or DBS tuner’s S video input (S-VIDEO INPUT)

to the

MONITOR OUT-1 jack using a S jack connection

cord.

• The monitor TV can also be connected in the same way to the S-

VIDEO MONITOR OUT-2 jack. Note, however, that the AVR-
5800’s on-screen display signals are not output from this jack.

S-VIDEO

• Connect the TV’s or DBS tuner’s S video output jack

(S-VIDEO OUTPUT) to the

TV/DBS IN

jack using an S jack connection cord.

S-VIDEO

• Connect the video deck’s S output jack (S-OUT) to the

VCR-1 IN jack and

the video deck’s S input jack (S-IN) to the

VCR-1 OUT jack using S jack

connection cords.

• Connect the video deck’s S output jack (S-OUT) to the

VCR-2 IN jack and

the video deck’s S input jack (S-IN) to the

VCR-2 OUT jack using S jack

connection cords.

Connect the third video deck to the VCR-3 jacks in the same way.

S-VIDEO

Connect the components’ audio inputs and outputs as described on page 6.

NOTE:
• The on-screen display signals are not output from the video signal MONITOR OUT-2 (yellow) or S-Video signal MONITOR OUT-2 jack.
• The MONITOR OUT-2 output switches together with the input function selected with the REC/M-ZONE 2 button. To use as the monitor

output, set “SOURCE” as the REC/M-ZONE 2 input function.