beautypg.com

Connecting the antenna terminals – Denon AVR-5800 User Manual

Page 10

background image

10

1

4

2

3

Connecting the antenna terminals

DIRECTION OF
BROADCASTING
STATION

AM LOOP ANTENNA
(Supplied)

FM ANTENNA

GROUND

AM OUTDOOR
ANTENNA

300

/ohms

TERMINALS

FM ANTENNA
ADAPTER
(Supplied)

FM INDOOR
ANTENNA
(Supplied)

300

/ohms

FEEDER
CABLE

75

/ohms

COAXIAL
CABLE

F-type converter plug (attached)
• When using the FM antenna

attach to this apparatus

• An F-type FM antenna cable plug can be connected directly.
• If the FM antenna cable’s plug is not of the F-type, connect using the

included antenna adapter.

AM loop antenna assembly

Connect to the AM
antenna terminals.

Bend in the reverse
direction.

Remove the vinyl tie
and take out the
connection line.

a. With the antenna

on top any stable
surface.

b. With the antenna

attached to a
wall.

Mount

Installation hole
Mount on wall, etc.

Open the cover

ANTENNA ADAPTER

REMOVE

CLAMP

75

/ohms COAXIAL CABLE

CLAMP

CLAMP

PULL

PULL

SHUT

Connection of AM antennas

1. Loosen by turning

counterclockwise.

2. Insert the

cord.

3. Tighten by turning

clockwise.

Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC which provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as
practical.

Notes:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect

the AM loop antenna.

• Make sure AM loop antenna lead terminals do not touch

metal parts of the panel.

FM antenna adapter assembly