Denon AVR-5800 - Manual (Page 53)

53
Preset memory
1 Use the “Auto tuning” or “Manual tuning” operation to tune
in the station to be preset in the memory.
2 Press the MEMORY button.
3 Main unit:
Press the MODE SELECT button until “TUNER PRESET”
appears on the set’s display.
Remote control unit:
Press the SHIFT button and select the desired memory block
(A to E).
MODE
SELECT
(Main unit) (Remote control unit)
4 Main unit:
Select the desired preset channel (1 to 8).
Remote control unit:
Press the PRESET UP or DOWN button to select the desired
preset channel (1 to 8).
FUNCTION
(Main unit) (Remote control unit)
5 Press the MEMORY button again to store the station in the
preset memory.
To preset other channels, repeat steps 2 to 5.
A total of 40 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to E.
3 4
Checking the preset stations
The preset broadcast stations can be checked on the on screen display.
1 Press the ON SCREEN button repeatedly until the “Tuner Preset Stations” screen appears on the
on screen display.
1
(Remote control unit)
4
(Remote control unit)
(Remote control unit)