Denon AVR-5800 - Manual (Page 24)

24
4 Select the desired setting, then press jog stick “ENTER”.
Variable:
The level can be adjusted freely using the buttons on the remote control unit (M. ZONE 1 4/5,
VOLUME UP and VOLUME DOWN).
-40 dB, 0 dB:
The output level is fixed at the set level and the volume can no longer be adjusted.
Make this setting to switch the power amplifier for the surround back channel to Multi-zone 2.
[2] Power amplifier assignment function setting
1 At the System Setup Menu, select “Multi Zone Control”.
2 Press jog stick “ENTER” to switch to the “Multi Zone Control” screen.
3 Select “Power Amp Assignment” then press the “ENTER” button on the jog stick.
4 Select “Surround Back” to use as the surround back
channel, “Zone-2” to use as multi-zone 2, then press
jog stick “ENTER”.
When “Surround Back” is selected When “M-Zone2” is selected