Smithco Spray Star 1000 (sn 100199 – 100223) Parts & Service Manual - Manual (Page 95)

93
Accessories
10-325 HYDRAULIC LIFT KIT PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 18-171 11 /
16
x 9 /
16
Straight Thread 90° Elbow 4
2 10-187 Hydraulic Cylinder 2
14-273 Seal Kit 1 per
3* 33-331 Left Actuator Bracket 1
4* 33-330 Right Actuator Bracket 1
5* HCPS-12-225 Stainless Steel Clevis Pin 1 /
2
x 2 1 /
4
4
HPS-18-100 Stainless Steel Cotter Pin 1 /
8
x 1 4
6* 33-329 Center Mount 1
7* HSSQ-38-16-150 Square Head Set Screw 3 /
8
- 16 x 1 1 /
2
2
HN-38-16 Nut 3 /
8
- 16 2
* Part of 10-160 Boom
INSTALLATION INSTRUCTIONS
1. Shut machine off. Set park brake. Allow system to cool down.
2. Remove the boom lifts from boom and replace with hydraulic cylinder (Ref 2). Use the existing hardware.
3. Refer to the valve drawing for placement of fittings. The valve mounts in the seat panel on the right side.
Use two 1 /
4
- 20 x 2 bolts, washers, lock washers and nuts. Refer to the decal for correct placement.
4. Remove the hose from the bottom of the oil cooler that comes out of the top of the tee. This hose traces
back to the top of the orbitrol. Place that hose to the inlet side of the hydraulic valve.
5. Use the short hose 10-146 (Ref 3) to connect the outlet side of the valve to the tee on the oil cooler.
6. Use the four other hoses to connect the valve to the hydraulic cylinders. Refer to the hydraulic drawing.
42-220 2-BANK HYDRAULIC VALVE PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1* 14-106 Relief Assembly Kit 1
2* 14-062 Seal Kit 1
3* 42-220-01 Spool 1 Per Bank
4* 42-220-01 Valve Housing 1
5 18-171 11 /
16
x 9 /
16
Straight Thread 90° Elbow 3
6 18-306 11 /
16
x 9 /
16
Straight Thread Connector 3
7 18-309 11 /
16
Swivel Nut 90° Elbow 2
8* 14-203 Spring Centered Kit 1 Per Bank
9* 13-261-02 Plug 1
10*† 42-220-04 Actuator Housing 2
11*† 42-220-05 Dowel Pin 2
12*† 42-220-03 Actuator Link 2
13 42-226 Valve Handles 2
14 42-220-08 Tapered Knob (comes with handle) 2
15 HNJ-516-18 Jam Nut 5 /
16
-18 (comes with handle) 2
16*† 42-220-07 Actuator Boot 2
17* 42-220-06 Socket Head Cap Screw 4
* 42-220 2-Bank Hydraulic Valve (includes all * items)
† 42-220-09 Actuator Housing Assembly 1 Per Bank
(Continued On Next Page)