Smithco Spray Star 1000 (sn 100199 – 100223) Parts & Service Manual - Manual (Page 6)

4
Service
MAINTENANCE
Before servicing or making adjustments to machine, stop engine and remove key from
ignition.
Use all procedures and parts prescribed by the manufacturer's. Read the engine manual
before operation.
LUBRICATION
Use No. 2 General purpose lithium base grease and lubricate every 100 hours. The Spray Star 1000 has 9
grease fittings.
A. One on the rod end of hydraulic cylinder.
B. One on each the right and left spindles.
C. One on the center front pivot.
D. One on the pump pivot.
E. One on the brake relay.
F. One on the pedal relay.
G. One on the reverse pedal.
H. One on the forward pedal.
Every 500 hours of operation, seperate the hydrostatic pump and the engine, clean the splined areas and lightly
grease the male portion of the pump spline. Use either Dow Corning® G-N Metal Assembly Paste or #77 As-
sembly Paste (Kohler# 25 357 12-s).
As you mount the pump back onto the engine, be certain the mating surfaces are clean and free of any foreign
material and that the pump is correctly aligned.
EELCTRICAL CONNECTIONS
Use dielectric grease on all electrical connections.