Skutch Electronics BA-1000 V4.04 - Manual (Page 5)

Version 4.04 Page 5
The number doesn’t exist if it beeps and shows the
following (skip down to Exit below):
- Search 00000 –
Entry Not Found!
If it finds a match, it shows something like:
1=Change 3=Next
7860000
If it this is the number, press 1; otherwise, press 3
and it will keep looking.
To mark the number to be erased, enter:
#
* * * * * *
* * * * * *
The display will have a small “x” in the top right:
N-Edit> 00000 x
7860000
To finish erasing the number, press:
#
Exit
To return to the Menu, press:
~
Wait until it shows:
N-Menu-v4.02--MO
10/01/02 08:00am
Go back to your normal dialing file with:
4 # * ~
* * *
! Erase ALL the Numbers from
the No Dial List
Select the No Dial list with:
4 # * ~
Enter the number entry mode with:
2 #
Erase any old numbers with:
1 5
Wait until it shows:
N-Entry> 00000 N
Now go back to your normal dialing file with:
~ 4 # 0 ~
* * *
! Listen to the Messages the
system recorded
Enter the Playback mode with:
9 #
Wait until it shows:
0=Play <<00000>>
1=Back 2=Advance
To hear the messages, press:
0
The messages are done when it stops & beeps 4 times. To
erase the messages, and get ready for the next session, enter:
~ 1
* * *
! Resume the last calling session
To pick back up calling numbers, from where you left off
on the last calling session, enter:
3 #
Wait until it look something like:
0-Entry> 00000
---- #=Dial ----
To start the calling, press:
#
* * *
! Turn off Caller ID, so the
people you call won’t see your
number
First, enter the Setup mode, and go to the Pre-Dial String
option, with:
* # # # #
# # # # #
It should show:
Pre-Dial String
1=Change #=Next
Change the Pre-Dial String with:
1
Enter the code to turn off Caller ID with:
* 3 6 7 * 0 2 # 3