beautypg.com

Introduction, Installation diagram placing a call on hold, Taking a call off hold – Skutch Electronics BA-1 User Manual

Page 2: Status of "in-use" lights, Disabling a non used "in-use" light, Power up, Simply select the line and pick up the phone

background image

Introduction

Thank you for purchasing the Skutch BA-1 Hold Button Adapter for
use with the BA-704 series Promotion-On-Hold modules. The BA-1
mounts directly to your corded telephone and becomes an integral part
of the phone itself. It supplies a HOLD BUTTON and four "IN-USE"
lights that show the accurate status of each telephone line. The BA-1 is
perfect for heavy use phones where properly functioning "IN-USE"
lights and easy to use HOLD functions are mandatory. A separate
BA-1 should be installed on each high traffic corded telephone. Other
phones and all cordless phones can still use the STAR tone to activate
the Promotion-On-Hold system. The BA-1 requires that a Skutch BA-
704 Promotion-On-Hold module be used on one of the telephones.

Installation Diagram

Placing A Call ON HOLD

Press the hold button and hang up the telephone or select another line
within 6 seconds of pressing the button.

Taking a call off hold

Simply select the line and pick up the phone.

Status of "IN-USE" Lights

OFF

: Indicates line is hung up and not in use.

Steady RED

: Another phone is currently using the line,

or line is not connected to BA-1.
Steady GREEN

: Line is being used by this phone.

Flashing RED

: Another phone has placed the call ON HOLD.

Flashing GREEN

: This phone has placed the line ON HOLD.

Disabling a non used "IN-USE" light

If you have less than four lines then the unused "IN-USE" lights on
the BA-1 will stay lit RED. If you wish you may disable the unused
lights by pressing and holding down the BA-1 HOLD button until
only the desired lights are lit up YELLOW. At this point release the
HOLD button. The BA-1 will retain this information until the unit is
disconnected from power.

Power Up

On initial power up, the lights will alternately flash RED and GREEN for 2 seconds.

Tech Support - 916-786-6186

If you have any problems getting the BA-1 to work properly feel free to give us a
call. Technical Support is available between the hours of 7:30 AM and 4:30 PM
Pacific Time, Monday through Friday.

B A -1

Lin e s

H O LD

1

2

3

4

123
456
789
*0#

Te le p h o n e

Te le p h o n e Ja c ks

1 1 5 V A C

1-

2-

3

Li

n

e

1-

2

-3

P

h

one

3-

4

Li

ne

3-

4

Ph

o

n

e

1 & 2

3 & 4

Ba c k V ie w