Skutch Electronics AS-703-G - Manual

•
Installation
Follow the six steps below for connection to your single or GE 2-9450
telephones.
•
Operation
Once the everything is connected the unit is ready to go. The unit will
automatically play your message when a call is placed ON HOLD. Be sure
you set your Message Source to a good listening level.
NOTE: If you are connecting any GE 2-9451
telephones, be sure you set them for 2-9450 compatibility
mode.
•
Troubleshooting Guide
•
No Audio But The Light Turns Green On The
AS-703-G
! Make sure the Message Source is playing.
! Make sure the Message Source volume is turned up.
! Make sure that the audio cable is connected from the
headphone jack on the Message Source, to the AUDIO IN jack
on the AS-703-G.
! Make sure the audio cable has the right plug for the AS-703-G
(male phono or RCA).
! Make sure you are NOT using a "Dubbing" audio cord.
•
Tech Support - 916-786-6186
If you have any problems getting the unit to work properly feel free to
give us a call. Technical Support is available between the hours of 7:30 AM
and 4:30 PM Pacific Time, Monday through Friday.
LINES 3 & 4 IN
Audio
Source
Head
Phones
Phone Jack
1. Plug the L1&L2 jack
into Telephone 1, 2 & 3
on AS-703.
3. Plug
AS-703
into
Phone
Jack 1 & 2
5. Plug
AS-703
into
120VAC
wall
outlet. 6. Connect
audio
cable
from
AS-703 to
Audio
Source.
2. Plug the L3&L4 jack
into Telephone 3 & 4
on AS-703.
Phone Jack
Lines 1 & 2 Lines 3 & 4
GE 2-9450
Phone
4. Plug
AS-703
into
Phone
Jack 3 & 4