Skutch Electronics T-70 User Manual
Installation • operation, Multi-line connection

•
Installation
•
Operation
In normal operation, the T-70 will connect the MAIN telephone line to
the Telecommunication Device. When the Telecommunication Device goes
OFF HOOK, the T-70 will place a BUSY across the other telephone lines.
When the Telecommunication Device hangs up, the T-70 will remove the
BUSY from the other lines and then it will wait for the next call. Whenever
the Telecommunication Device is activated for an OUTGOING call, the T-
70 will automatically connect the Telecommunication Device to the MAIN
telephone line.
If you are using the T-70 during working hours, you should have our
Service Center install the NON-INTERRUPT Modification (call for current
pricing). If you do not choose thIs option, when the Telecommunication
Device grabs the line, anyone who happens to be on one of the other lines
will notice a dramatic drop in the audio level on their line.
To disable the T-70 during business hours, you can turn off the
Telecommunication Device, or you can simply unplug the T-70 from power.
•
Multi-Line Connection
To cover more than four lines, you just plug the MAIN cord from one
T-70 into the female jack of the next T-70. You will notice that each
additional T-70 (other than the first unit) only gives you three more lines; so,
to cover up to thirteen telephone lines, you would need four T-70's.
•
Tech Support - 916-786-6186
If you have any problems getting the T-70 to work properly feel free to
give us a call. Technical Support is available between the hours of 7:30 AM
and 4:30 PM Pacific Time, Monday through Friday.
E LE C T R O N IC S
B U S Y O U T
T-7 0
M O D E L
Wall
Phone
Jack
Wall
Phone
Jack
Wall
Phone
Jack
Lin e 1
Lin e 2
Lin e 3
Wall
Phone
Jack
Lin e 4