Skutch Electronics CK-1A6 - Manual (Page 3)

Page 3 of 4
L1/L2
L3/L4
Line 1 & 2 to wall
Audio Cord from MP3 Player
Line 3 & 4 to wall
Fig #3
4- Connect the short modular cord from [1&2 to Phone] on the CK-1 to the [L1/L2] jack
on the Phone.
5- Connect the short modular cord from [3&4 to Phone] on the CK-1 to [L3/L4] jack on
the Phone.
6- The audio cord that comes with the CK-1A6 is ONLY used for CD Players. If you
have a digital player, then you should be using the audio cord that came with your digital
unit. Connect the proper audio cord from your music source, to the AUDIO IN jack on
the back of the CK-1 box.
7- Connect a MOD cord from Telephone Wall Jack 1&2 to [1&2 to Line] on CK-1.
8- Connect a MOD cord from Telephone Wall Jack 3&4 to [3&4 to Line] on CK-1.
9- Connect the POWER CUBE from the CK-1 box to 115VAC power.
Disabling Internal Music On Hold SB67118
1- Press "MENU/ENTER" button.
2- Press down arrow repeatedly until arrow points at "Base Setup", then Press
"MENU/ENTER"
3- Press down arrow repeatedly until arrow points at "Music On Hold", then Press
MENU/ENTER.
4- Press "MENU/ENTER" then press DOWN ARROW. Display should read "Off"
5- Press "MENU/ENTER" then "EXIT".