Sierra Video RCP-1616 - Manual (Page 45)

SIERRA VIDEO
35
Troubleshooting
Introduction
Button Lamp Test
If the input one button is held down when power is first applied, the control panel will
enter a Keyboard/Lamp test function. If no button is held down, the control panel will go
directly to the status mode.
Front Panel Error Indications
RCP Configuration Fault
If there is a serious problem with the RCP where it cannot operate properly, the LOCK
and FUNC buttons will blink RED. All other buttons on the panel will be off.
NOTES:
If the following recommended actions still do not result in satisfactory operation, please
consult your Sierra Video Dealer.
Technical Support
Sierra Video has made every effort to insure that your unit has been fully tested and is configured
to your order specifications. If problems arise that can not be resolved, please contact the Sierra
Video technical support department.
Sierra Video factory- (530) 478-1000
Email- [email protected]
Chapter 6