Sierra Video RCP-1616 - Manual (Page 24)

SIERRA VIDEO
14
Lock/Page Button- The “Lock” button on the front panel can disable panel operation.
There are 2 modes of operation for this button;
1. Panel can be locked. Lock button is enabled. It goes on/off when pressed. The
button will be RED when it is on. This is the default mode of operation.
2. Panel always locked, show status. Lock button disabled and is always on. The
button will be PURPLE.
While the panel is locked:
The following buttons will be off and disabled (nothing will happen when they are
pressed):
 FUNC button (see exception for Factory Defaults)
 A
button
 V
button
 TAKE
button
The “Lock” button on the front panel can also be used to change “pages” of operation.
In this mode, this button will sequence through 2 or 3 pages (settable via the web page)
of inputs and outputs. The button will have a different color for each page. The color for
each page is also settable via the web page.
By default this button will always start on page 1.
If the panel is programmed for 2 pages:
1. Pressing the button once will go to page 2.
2. Pressing the button a second time will go back to page 1
If the panel is programmed for 3 pages:
1. Pressing the button once will go to page 2.
2. Pressing the button a second time will go to page 3.
3. Pressing the button a third time will go back to page 1.
When “Pages” are selected the window changes to allow you to change the button color
to indicate which “page” you are on.