Sierra Video RCP-1616 - Manual (Page 18)

SIERRA VIDEO
8
Hardware Panel
To name the RCP or make changes to the network communications (i.e. IP address),
select the “Hardware Panel” tab.
The front panel has the ability to change the network address. If you wish to disable this
function, remove the check from the box “Allow Network Settings to be changed from the
front panel”.
The “refresh” button will re-read the current settings in the RCP.
Make any changes necessary and press “Save” to implement changes.
Note:
Changing any parameters in this window will cause your browser to lose communication with the
RCP. You must enter the new IP address in your browser to re-establish communications.
The RCP need not be reset for changes to take effect.