Sierra Video RCP-1616 - Manual (Page 33)

SIERRA VIDEO
23
Operation
Introduction
The purpose of an RCP is to switch any of the inputs (sources) to any of the outputs
(destinations). Any input can be connected to any or all outputs but each output can only
be connected to a single input. Control remains the most important component of your
new system.
RCP Control Panel Operation
The RCP control panel consists of, 16 inputs, 16 outputs (32 inputs, 32 outputs for the
RCP-3232 model), a “V” (video only) button, an “A” (audio only) button, a function, a lock,
and a take button. Use these features to switch between video and/or external audio,
select the output and input and access special functions.
Button Colors
 Take button will be blinking RED when enabled. Otherwise, it will be off.
 The FUNC button will be YELLOW in base operation.
 In LOCK mode, the LOCK button will be RED or PURPLE when the panel is
locked.Otherwise, it will be off.
 In PAGE mode, the LOCK button will be the color of the page being displayed.
(See Button Settings for details).
 The V (video levels) button will be GREEN when selected. Otherwise, it will be
off.
 The A (audio levels) button will be BLUE when selected. Otherwise, it will be off.
Chapter 4