Sensoray 518 - Manual (Page 56)

55
Command Summary
READ CHANNEL DATA - read linearized sensor data from one channel command
command: (CHAN)
response: (HIGH DATA),(LOW DATA)
DEFINE CHANNEL SENSOR - declare channel sensor type command
command: (16 + CHAN),(SENSOR DEFINITION CODE)
response: NONE
DEFINE CHANNEL ALARM LIMITS - declare normal data limits for one channel
command: (32 + CHAN),
(HILIMIT MSB), (HILIMIT LSB),
(LOLIMIT MSB), (LOLIMIT LSB)
response: NONE
READ ALARM FLAGS - read channel alarm status flags and turn off board alarm
command: (48)
response: (HIGH ALARM LIMIT FLAGS), (LOW ALARM LIMIT FLAGS)
READ BOARD TEMPERATURE - read 7409TC reference temperature
command: (64)
response: (BOARD TEMP MSB), (BOARD TEMP LSB)
RELEASE LOW POWER STANDBY - exit Low Power Standby mode
command: (66)
response: NONE
LOW POWER STANDBY - enter Low Power Standby mode
command: (67)
response: NONE
SET OPEN SENSOR DATA VALUES - establish data values for open sensor condition
command: (80), (OPEN SENSOR DATA FLAGS)
response: NONE
READ DATA FROM ALL CHANNELS
command: (88)
response: (CH0 MSB), (CH0 LSB),
(CH1 MSB), (CH1 LSB),
(CH2 MSB), (CH2 LSB),
(CH3 MSB), (CH3 LSB),
(CH4 MSB), (CH4 LSB),
(CH5 MSB), (CH5 LSB),
(CH6 MSB), (CH6 LSB),
(CH7 MSB), (CH7 LSB)
SET FILTER TIME CONSTANT - specify filter factor for one channel
command: (96 + CHAN), (FILTER CONSTANT)
response: NONE
TARE GAGE - zero gage data value with present load
command: (112 + CHAN)
response: NONE
READ GAGE CALIBRATION - fetch gage calibration data from one channel
command: (128 + CHAN)
response: (S0), (S1), (S2), (S3), (S4), (S5)