Seaward Test n Tag Printer - Manual (Page 30)

29
Print has lines running across 1)Remove cartridge and gently wipe
head with alcohol wipes or clean
cloth. Re-install cartridge.
2) Try another cartridge – ensure
new cartridge tensioned prior to
installing.
3) Fault persists – contact Seaward
Technical Support.
No Barcode printed on label The appliance ID length is greater
than 12 digits, barcode cannot be
printed
Tester displays a “Timeout
error code 0xFFFF” This means that the tester has tried to
send data to the printer, but it has not
received any response.
1) Check the printer is turned on.
2) Check the Bluetooth favourites –
Setup screen, Check that the printer
type is set to “Test’n’Tag”.