Seaward Power Clamp - Manual (Page 8)

7
Warning
To avoid electrical shock, hazard or damage to meter, do not
attempt to measurement that might exceed 1000 V DC or AC
RMS. Do not apply more then 1000 V DC or AC RMS between
the comment input terminal and earth ground.
Note - If the measured voltage is greater than 30 V DC or AC
RMS, the display will show the " " symbol.
Measuring Current
OK
I
I+(-I)=0
OK
OK
I
I
I
I
CAT.Ⅳ.600V
CAT.Ⅲ.1000V
with respect to
earth for the jaw.
Tactile Barrier for
hand guard.
Do not hold
the meter across
the Tactile Barrier.
Caution
Please do not measure current from clamp jaw when tempera-
ture probe is connected to meter.
- Don’t clamp on any conductor while the meter power on.
- Torch lightening when clamping.