Seaward Power Clamp - Manual (Page 20)

19
CAUTION
To avoid possible damage to the Meter or to the equipment
under test, disconnect circuit power and discharge all high -
voltage capacitors before measuring resistance and diode.
Note :
- Select "Ω", "#" or "%" indicator then press the navigator key
to enter the Ω/#/ %mode.
- Select "Ω", "#" or "%" indicator then press the navigator key
for more than 2sec to return to the AUTO SENSE mode.
Note - Under diode mode, LCD displays "bad" when measuring
a diode conducted at forward and reverse bias.
Measuring Capacitance
Set the rotary switch to the " & " position.
Capcitance