Seaward Power Clamp - Manual (Page 3)

2
CAUTION
˙ Disconnect the test leads from the test points before chang-
ing the position of the function rotary switch.
˙
Never connect a source of voltage with the function rotary
switch in Ω, & , position.
˙ Do not expose Meter to extremes in temperature or high
humidity.
˙
Never set the meter in Ω, & , function to measure the
voltage of a power supply circuit in equipment that could
result in damage the meter and the equipment under test.
Symbols as marked on the Meter and Instruction
manual
Unsafe Voltage
To alert you to the presence of a potentially hazardous voltage,
when the Tester detects a voltage ≧30 V or a voltage
overload (OL) in V . The symbol is displayed.
Maintenance
Do not attempt to repair this Meter. It contains no userservice-
able parts. Repair or servicing should only be performed by
qualified personnel.
Cleaning
Periodically wipe the case with a dry cloth and detergent.
Do not use abrasives or solvents.
Risk of electric shock
See instruction card
DC measurement
Equipment protected by double or reinforced
insulation
Battery
Earth
AC measurement
Conforms to EU directives
E
Application around and removal from hazardous live
conductors is permitted
Do not discard this product or throw away.