Seaward KD1E - Manual (Page 18)

KD1E Range Operating Instructions
16
10.0 Maintenance
10.1 The KD1E range of potential indicators is extremely
robust and should always be kept free from dust or
any loose carbon particles.
10.2 Ensure the KD1E range of potential indicators is
kept dry with no surface moisture on either the
body or housing / hand guard of the indicator.
10.3 The body of the potential indicator should be
regularly inspected to ensure no deep scratches or
physical damage.
10.4 Ensure the insulation of the cable is fully intact and
that no sharp creases have occurred in the cable.
10.5 It is recommended that the potential indicator
should be regularly proof tested at scheduled
maintenance intervals as well as before and after
testing on energised circuits.
10.6 If any of the above conditions have been observed
then the potential indicator must be appropriately
secured to prevent any further use.
10.7 Ensure that the equipment is stored dry with no
surface moisture on the body or housing / hand
guard of the indicator or phasing rod.
10.8 Always transport the equipment in the carrying
case provided. Always handle with care.
10.9 There are no user serviceable parts on the equipment.
Digital Indicator only – Always ensure the
earth cable is disconnected from the potential
indicator when not in use, to prevent the battery
from being fully discharged.