Seaward KD1E - Manual (Page 15)

KD1E Range Operating Instructions
13
8.2 Operation of Extension and Bent end Rods on
HV Systems
8.2.1 Extension rods can be used on a HV system with
either the digital unit or neon unit. Extension rods
cannot be used without fi rst being connected to
either a digital unit or neon unit.
8.2.2 The digital unit and phasing rod can be used on a
HV system up to the designated voltage levels
without an extension rod.
Always fi t the forked head to extension rods
when testing Overhead Lines.
8.3 Proof Testing of the Extension Rod
8.3.1 Extension rods must be proof tested using the
Seaward PH3 proving unit, both before and after
use. For more detailed information see section 9.