Seaward G2000 - Manual (Page 15)

General Guidance Notes
Please take adequate care with packing and arrange insurance cover against transit damage or loss when
returning the instrument – if possible use the original packing box and supports.
Regularly calibrate all test equipment to meet internal quality or regulatory licensing authority requirements and to
keep the equipment in a safe working condition. Return the equipment to Clare Instruments for this purpose.
Keep the equipment in a clean condition. Examine all input and test output leads and connectors regularly to
guarantee they are in a safe working condition.
The equipment contains parts that are specific to the equipment only, therefore, order spare parts from the above
address. Clare Instruments Ltd. strictly forbid any use of spare parts, other than those acquired from the original
manufacturer.
SUMMARY OF SAFETY INFORMATION
Should there be any doubt about location, setting up procedure or operation of the test equipment, contact Clare
Instruments Ltd. Report any apparent malfunctions immediately.
Maintain the test equipment in accordance with Health and Safety at Work Act and the Electricity at Work
Regulations. The supply socket used for connection to the incoming mains system should undergo earth loop
impedance measurements in keeping with the regulations to guarantee safe operation.
NOTE: Your Health and Safety Inspector may, with the benefit of on-site observations, offer alternate or additional
instructions to the above recommendations.
13