Seaward G2000 - Manual (Page 12)

General Guidance Notes
SAFETY
The design of the CLARE G2000 Test Station meets the European Commission Directive No. 73/23/EEC, relating
to the “Low Voltage Directive”. This is in accordance with BS EN 61010-1: 1993 – Safety requirements for
electrical equipment for measurement control, and laboratory use. This unit is also compliant with the draft
European Standard prEN 50191:1997.
The design of the equipment is intended for use under the following conditions:
Indoors;
Altitude up to 2000 m;
Temperature 5
°C to 40°C;
Maximum relative humidity 80% for temperatures up to 31
°C to 50% at 40°C;
Mains supply voltage fluctuations of
±10% of the nominal voltage.
The user MUST follow the remainder of this section on safety, installation, guidance and maintenance to
guarantee safe operation and to maintain the equipment in a safe condition.
WARNING! This equipment requires a protective earth conductor. Do not use the equipment without a protective
earth conductor or intentionally interrupt the protective earth conductor.
10