Seaward DO5000 Series - Manual (Page 5)

Operating Instructions Microhmmeter Type DO5000
Table of Contents
1. Introduction 1
1.1 Overview 1
1.2 Definitions and Terminology 2
1.3 Standard Features of the DO5000 3
1.4 Principles of Measurement 4
1.5 Specification 5
1.5.1 Measurement Accuracy 5
1.5.2 Programmable Current 5
1.5.3 Measurement Accuracy with Current Levels 5
1.5.4 Temperature Compensation 5
1.5.5 Conditions of Use 6
1.5.6 Lead Resistance 6
1.5.7 Mains Supply 6
1.5.8 Battery Operation 6
1.5.9 Weight and Size 6
2. Setting up the DO5000 7
2.1 Safety Information 7
2.1.1 Mains Voltage Selection and Changing the Fuse 7
2.2 Unpacking the Instrument 8
3. About the DO5000 9
3.1 The Front Panel 9
3.2 ON/OFF Switch 9
3.3 The Function Keypad 9
3.4 Table Summary of Basic Functions 10
3.5 About the DO5000 Display Screen 12
3.6 About the DO5000 Function Keys 13
4. Setting up measurement options 14
4.1 Range Selection 14
4.2 Current Selection 14
4.3 Measurement Mode 14
4.4 Temperature Compensation 16
4.5 Limits 17
4.6 Data Logging Function 18
4.7 Setup Memory 18
4.8 Display Menu 19
4.9 Measure/Hold Function 20
4.10 Measure Stop Function 20
4.11 Measurement Zero 10
5. Measuring with the DO5000 21
5.1 Connecting to the DO5000 21
5.2 Connecting to the Resistance to be Measured 21
5.3 Lead Connection Types 21
5.4 Resistance Measurement 23
5.5 Resistance Measurement with Temperature Compensation 23
5.6 Resistance Measurement with Limits 24
5.7 Measurement of Inductive Devices 25
6. Accessories 27
6.1 Leads 27
6.2 Wire Clamps 27
6.3 Coin Jigs 27
6.4 Interfaces 27
6.5 Temperature Probe 28