Seaward DO5000 Series - Manual (Page 14)

Operating Instructions Microhmmeter Type DO5000
9
3 About the DO5000
This section introduces you to the features and functions of the DO5000 Microhmmeter.
3.1 The Front Panel
3.2 ON/OFF Switch
The On/Off switch switches the DO5000 on and off. During Power On the last measurement
function setup is restored. The rear mounted cooling fan will always run and the cooling vent
must not be blocked.
3.2.1 ON/OFF Switch Battery Version DO5001
The Front Panel on/off switches the DO5001 on and off. The rear switch situated adjacent to
the inlet filter switches the mains supply on/off.
3.3 The Function Keypad
All DO5000 measurements and programming facilities are accessed through the function
keypad. A brief description of key functions is given in the following table. For a detailed
description of how to use the keys to configure and operate the DO5000, refer to section 4.