Seaward DO5000 Series - Manual (Page 17)

Operating Instructions Microhmmeter Type DO5000
12
3.5 About the DO5000 Display screen
The liquid crystal graphic display clearly indicates the measured resistance and measurement
status as well as displaying available menu options and measurement analysis when selected.
Figure 3.5.1 - Example of Resistance Measurement Mode
The keypad below the display screen controls the DO5000.
Some keys perform a function directly. For example,
selects 3m Ω range.
Other keys switch the display to configuration mode which allows you to select options
through a series of menus.
The option menus all follow the same format. The configuration mode is indicated by splitting
the screen with a dashed line directly below the main reading. An instruction prompt under the
dashed line indicates the current menu. The available menu options are displayed on the
bottom row of the display as shown in figure 3.5.2. Press the corresponding function key to
select an option.
Figure 3.5.2 Example of current mode menu
Indicates current mode Indicates menu options.
The lines printed on the front panel helps you to link the menu option printed on the screen
with the correct key on the keypad.
AUTO1: 30m
: 10.0A (AVE)
Slow
+ 18.000 m
:
Meas Cont
AUTO1: 30m
: 10.0A (AVE)
Slow
+ 18.000 m
:
----------------------------------------------------------------------------------------
Powr
+I -I Ave Mode Mag Quit
0
3m
: