beautypg.com

Control panel and adjustments – Scotsman CU0415 User Manual

Page 10

background image

August 2013

Page 9

Service Manual for Models CU0415, CU0715 and CU0920

Ice Bridge Thickness Adjustment Area

Master Switch. Move to ON (left side depressed) to make ice, OFF

(centered) to shut off and WASH (right side depressed) for use in

cleaning.

Harvest Time Adjustment Area

Indicator Light Area.

Freeze Mode light is ON when unit is in a Freeze cycle.

Timer On light is ON when trigger point temperature is reached in

Freeze or Harvest.

Harvest Cycle Time Adjustment
After ice has formed in the inverted mold, it must be

released so it can be deposited in the storage bin

section. The harvest cycle is when that occurs, and

must be long enough for the ice to release. While the

harvest cycle length is self adjusting it can also be

manually adjusted if needed.

Proper harvest time is when the ice falls into the

bin and there is about 10 seconds extra harvest

time (pump and fan are off) before the freeze cycle

restarts.

If the harvest time is too short to release the ice,

the time may be increased by pushing the + sign on

the harvest time adjustment section of the control

panel. Operate the machine for another cycle to

confirm that the adjustment was correct. Note that too

much harvest time will slightly decrease making ice

capacity.

Control Panel and Adjustments

Adjustment Indicator Lights
Each push and release of the + or - button will change

the lights that glow or blink indicating a change in ice

size or harvest time. Example: pushing + one time

changes a blinking light to steady on type. If the lights

are on steady a single push of + will add one more

light to the right and it will blink. There are 10 settings.

All 5 lights on steady is the maximum setting and one

blinking light is the minimum.

Ice Too Thin

Ice Too Thick

Ice Just Right

Bridge Thickness

Ice Thickness Diagram

Ice Bridge Thickness Adjustment
Refer to the Ice Thickness Diagram for proper ice

size.

Adjust by pushing the + sign or – sign on the ice

bridge adjustment section of the control panel.

Changing bridge thickness should be a one-time

adjustment as the machine will automatically maintain

that ice thickness.

-

+

-

+

Ice Bridge Thickness Adjustment

Réglage de l'épaisseur du pont de glace

Ajuste del espesor del puente de hielo

Regolazione spessore ponte di ghiaccio

Anpassung der Eisbrückendicke

Harvest Time Adjustment

Réglage du temps de récolte

Ajuste del tiempo de cosecha

Regolazione orario di raccolta

Anpassung der Erntezeit

ON / OFF / WASH

MARCHE / ARRÊT / LAVAGE

ENCENDIDO / APAGADO / LAVADO

ON / OFF / LAVAGGIO

EIN / AUS / WASCHEN

Freeze Mode

Mode de congélation

Modo de congelamiento

Modalità congelamento

Gefriermodus

Timer On

Minuterie allumée

Cronómetro encendido

Timer attivato

Timer eingeschaltet

17-3386-01

This manual is related to the following products: